Omnitronic XDP-2800 Uživatelský manuál stáhnout pdf (Strana 32)

00047144.DOC, Version 1.0

32/32

3 To exit the loop and to continue the title, press the button OUT. The LEDs of the buttons IN and OUT will

top flashing but will remain on to indicate that a loop has been memorized and is ready to be engaged.

By selecting another title it is also possible to exit the loop.

4 To restart the loop, press the button RELOOP. The buttons IN and OUT will be flashing again.

5 To program another loop, redefine the starting and the end point with the button IN and OUT.

6.13 Selecting repeat functions

With the button REPEAT two different repeat functions can be selected:

• first actuation of the button: continuous repeat of the selected title (indication "REPEAT

1")

• second actuation of the button: continuous repeat of all titles of the CD (indication "REPEAT

ALL")

• third actuation of the button: return to normal play

6.14 Programming an individual title sequence

For playing selected titles in a certain order, an individual title sequence with up to 20 titles can be

programmed. This sequence will be deleted by ejecting the CD or switching the unit off and on again.

1 In pause mode, press the button PGM to activate the programming mode. The display indicates

"PROGRAM" and the first memory location number P-01.

2 Use the buttons

 and  or the control FOLDER/TRACK SEARCH to select the first title for the title

sequence. In programming mode, the folder navigation is deactivated. The title name is not indicated.

3 After the title selection, press the button PGM to confirm the selection. The display will show the second

memory location number P-02.

4 Proceed in the same way for all further titles until the title sequence has been programmed.

5 To start the playback of the title sequence, press the button

. The display will show the first memory

location number P-01. The title name is not indicated.

6 To add further titles to the title sequence, follow steps 1 to 5.

7 To delete the title sequence and to continue normal play, press the button

to switch to pause mode

and keep the button PGM pressed until the insertion "PROGRAM" will be extinguished.

7 CLEANING AND MAINTENANCE

Disconnectfrommainsbeforestartingmaintenanceoperation!

DANGERTOLIFE!

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use

alcohol or solvents! There are no serviceable parts inside the device. Maintenance and service operations

are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts.

Should you have further questions, please contact your dealer.

8 TECHNICAL SPECIFICATIONS

Power supply: 115/230 V AC, 50/60 Hz ~

Power consumption: 30 W

Type: double CD/USB/SD player

Available disc: CD/-R/-RW in CD-DA and MP3 formats (8 and 12 cm)

Available storage media: USB devices and SD(HC) cards (max. 32 GB)

Pitch adjustment: ±4 %, ±8 %, ±16 %

Display: elapsed time, remain time

Distortion: 0.09 %

S/N ratio: 70 dB

Frequency range: 20-20,000 Hz

Analog audio output: 2x stereo RCA/ 2 V

Dimensions (LxWxH): 483 x 260 x 97 mm (player units), 483 x 85 x 90 mm (control unit)

Weight: 5 kg

1 2 ... 27 28 29 30 31 32

Komentáře k této Příručce

Žádné komentáře

Omnitronic XDP-2800 Uživatelský manuál Strana 32

Komentáře k této Příručce

Související produkty a manuály pro CD přehrávače Omnitronic XDP-2800